Topline Logo


Alphabetical List of all products

PDS SDS

Acetone: Paint Thinner. Also used to clean mixed Fibreglass Resin and Catalyst off equipment before the mixture sets hard.


Data MSDS

Acrylic Undercoat: A top quality oil modified latex undercoat (water based) designed for easy application for both interior and exterior use. The emulsified oil used in the formulation, Linseed oil gives outstanding durability and penetration. The main advantages of 824 Acrylic Undercoat are fast drying, easy brushing, is suitable for use over damp surfaces and has a good gloss hold out.


PDS SDS

Add Grip: 658 Add Grip is a specially formulated slip-resistant powder-polymer additive, for pigmented floor coatings that mixes evenly into coatings without sinking to the bottom or floating to the surface.


PDS SDS

Add Matt: 641 Add Matt is a specially formulated flatting medium compatible with most oil-based paints and clear varnishes.


PDS SDS

Anticorrosive Vinyl Mastic:Single pack mastic designed for protection of immersed surfaces (steel/plywood). 392 Anticorrosive Vinyl Mastic offers excellent flexibility and moisture resistance. 392 Anticorrosive Vinyl Mastic also has excellent seawater immersion resistance. It has excellent compatibility with vinyl tar, bituminous anti-corrosive and chlorinated rubber system and with broad range of anti-fouling.


MSDS MSDS

Aquathane: Water based clear coating based on groundbreaking new urethane hybrid technology and has been formulated for use on interior timber surfaces such as architraves, skirting, doors, furniture and floors.

PDS SDS

Bituminous Enamel: A black bituminous coating designed for the sealing or porous surfaces and the protection of metal substrates from corrosion.


Data MSDS


Brushing Sanding Sealer: A single pack stable polyurethane clear coating designed for the sealing of interior timber prior to the application of a clear timber finish, such as 644 Clearthane.


PDS SDS

Ceramaglass: Ceramaglass is a single pack, clear, adhesion promoting, fast drying primer. Ceramaglass can be used on glass, ceramic tiles, porcelain, terrazzo, some plastics, laminates, vinyl & lino and vitreous enamel.


Data MSDS

Chalkboard Paint: 807 Chalkboard Paint is a water based, acrylic modified, flat paint for interior use on a wide variety of substrates designed to product a surface suitable for use as a blackboard. 807 Chalkboard Paint is a premium quality matt finish and may be used on plasterboard, MDF, timber, wall board, masonry and brickwork. 807 Chalkboard Paint is not normally suited for exterior use.


PDS SDS

Chassis Black: A bitumen based productdesc specially designed to protect motor vehicles, trailers, truck bodies etc. from corrosion and chipping of the undersides.


PDS SDS

Chlorinaline: A unique single pack, multiple purpose chlorinated rubber coating which can be used as a primer, undercoat or finishing coat. It is resistant to acidic and alkaline environments and possesses good adhesion to most types of surface. 304 Chloraline also exhibits low moisture permeability and excellent flexibility.


PDS SDS

Chlorinated Rubber Pool Paint:Forminex Chlorinated Rubber Pool Paint is a single pack paint designed for use pools previously painted with Chlorinated Rubber. It is not suitable over 2 pack epoxy or 2 pack polyurethane paints.


PDS SDS

Chlorinated Rubber Thinner: Thinner / Reducer for Chlorinated Rubber Pool Paint.


Data SDS

Chromate Free Primer: A modified alkyd based industrial metal primer for excellent corrosion resistance and protection for metal surfaces. Dries with a smooth satin finish, providing an excellent base for re-coating.


PDS SDS

Clear-thane: Single pack clear polyurethane, available in gloss or satin, for use on interior joinery and furniture. It has excellent resistance to abrasion, heat, moisture, and most oils, solvents and chemicals.


PDS SDS

Cold Galv: A single pack epoxy ester based zinc rich primer offering outstanding corrosion resistance and protection for steel as a single coat or as the primer in a multi coat finish. The high zinc content provides cathodic protection in a sacrificial manner to prevent spread of corrosion in the event of minor damage.

MSDS MSDS

Danish Oil Exterior: This product has a hand polished, low-lustre appearance. It is a penetrating, resin-based oil finish, for use on interior and exterior timbers. It is hard wearing, abrasion, heat and moisture resistant.


MSDS MSDS

Danish Oil Interior: 648 Danish Oil Interior has a hand polished, low-lustre appearance. It is a penetrating, resin-based oil finish, for use on interior timbers. It is hard wearing, abrasion, heat and moisture resistant.


PDS SDS

Deeptreat: A clear penetrating sealer for interior and exterior timber. It reduces the excessive intake and release of moisture, therefore minimising warping and splitting of timber and makes timber resistant to grain raising and water (tannin) staining. 649 Deeptreat's fungicide helps reduce mould and fungus growth.


MSDS MSDS

Deeptreat AQ: A clear penetrating sealer for interior and exterior timber. It reduces the excessive intake and release of moisture, therefore minimising warping and splitting of timber and makes timber resistant to grain raising and water (tannin) staining.


MSDS MSDS

Deck AQ: Water based penetrating timber finish for use on exterior and some interior timber surfaces and is a low build coating that will not give a “coated plastic” look to painted timber thus keeping a more natural appearance.


PDS SDS

Dinogrip: 940 Dinogrip is an internally plasticised, high build, high solids, water based acrylic co-polymer, incorporating synthetic crumbed rubber particles.


PDS SDS

Dinohide: 955 Dinohide is a single component water borne flexible acrylic co-polymer coating, is non-corrosive, non flammable and non-toxic. It has a thixotropic nature which eliminates sagging on vertical surfaces. 955 Dinohide is high-build flexible membrane coating that can be applied over most building substrates to provide long lasting protection against the effects of weathering even in corrosive chemical and marine atmospheres. The long life flexibility of 955 Dinohide will tolerate reasonable substrate movements without peeling or cracking, even bridging hairline cracks effectively.


PDS SDS

Drum Enamel: An economical fast drying high gloss enamel exhibiting excellent opacity suitable for drum re-finishing.


Data MSDS

Easyflow: A water based, ecomonical vinyl modified paint suitable for interior and exterior use on most types of surfaces. Easy Flo Flat Plastic features excellent durability and colour retention on exterior exposure. Easy to apply and dries quickly.


PDS SDS

Enamelac: Very fast drying spraying enamel incorporating lightfast, high opacity pigments, based on epoxy modified polymer resins. It produces a touch, wear resistant finish with excellent weathering and durability.


PDS SDS

Enamel Spraying Thinners: Thinners for most Single Pack (1K) Enamels and Varnishes.


PDS SDS SDS

Epoline Primer: A two pack epoxy-polyamide based primer surfacer. 858 Epoline Primer is an excellent anticorrosive coating possessing excellent adhesion to metal together with outstanding flexibility, chemical and water resistance. 858 Epoline Primer has also been formulated to give excellent build and sanding properties when used on timber, particle board, MDF board and similar substrates.


PDS SDS SDS

Epoxy Casting Resin (2:1 Mix ): 699 Epoxy Casting Resin is a crystal clear two-pack epoxy. It is most commonly used as a high build clear finish that dries to a hard glossy finish. Being solvent free it sets without shrinkage for laminating and sheathing and is low odour.


PDS SDS

Epoxy Enamel: 680 Epoxy Enamel is a single-pack, epoxy-ester marine grade enamel. It has excellent resistance to salt, chemicals, alkali and abrasion. It is highly flexible and has excellent anticorrosive properties when applied to metals.


PDS SDS SDS

Epoxy Glue: 682 Epoxy Glue is a superior non-shrink two component high viscosity gel adhesive especially designed for use in adverse conditions. It is supplied in a handy 1:1 mix ratio in a range of pack sizes.


PDS SDS

Epoxy Glue Powder: Epoxy Glue Adhesive Powder is a carefully formulated mineral & fibre powder blend, which can be mixed with the Marine Systems epoxy sheathing systems to thicken it & allow its use as a high density, full strength glue.


PDS SDS SDS

Epoxy LV Sheathing Resin: Forminex Low Viscosity 4:1 Epoxy Resin is a two-pack epoxy resin for laminating and sheathing. It may also be modified to become an adhesive or filler/putty (See instructions below). It has been developed to provide superior wet out and cured characteristics at ambient temperatures. The low mixed viscosity assists good penetration and wet out.


PDS SDS

Epoxy Pool Paint: 656 Epoxy Pool Paint is a polyamide cured 2-Pack epoxy coating. It has excellent resistance to pool chemicals, abrasion, and attack from algae and provides a smooth, easy to clean finish.


PDS SDS

Epoxy Thinners: Thinners for all Forminex Two Pack (2K) Epoxy coatings.


PDS SDS SDS

Epoxy Timber Preserver: 665 Epoxy Timber Preserver is an excellent barrier coating for all marine and general situations. 665 Epoxy Timber Preserver also has uses on other absorbent substrates such as concrete.


PDS SDS

Epoxy Undercoat (1K): 660 Epoxy Undercoat is a single-pack, epoxy-ester marine grade primer and undercoat. It has excellent resistance to salt, chemicals, alkali and abrasion. It is highly flexible and has excellent anticorrosive properties when applied to metals. Dries to a smooth matt finish providing an excellent base for over coating.

PDS SDS SDS

Estagloss: A two pack non yellowing polyurethane enamel exhibiting outstanding gloss, colour retention and exterior durability coupled with a high degree of chemical, solvent and abrasion resistance. On properly prepared surfaces, the performance of this material is far beyond that obtained by any conventional coating system.


Data MSDS

Exterior Decking Oil: MONOPACK Decking Oil is a heavy duty oil/resin based penetrating finish for use on exterior timber decking.



MSDS MSDS

Exterior Wood Oil & Exterior Wood Oil Plus: 673 Exterior Wood Oil & Exterior Wood Oil Plus are hard wearing oil/resin penetrating timber finish for use on exterior and some interior timber surfaces and contains a fungicide and is therefore resistant to mould attack and is formulated to resist darkening with age. 673 Exterior Wood Oil & Exterior Wood Oil Plus is non film forming so cannot crack peel or blister.


PDS SDS SDS

E2 Primer: Forminex E2 Primer is a 2 part epoxy resin based primer coat ideally suitable for use on all ferrous and non-ferrous metal substances.


PDS SDS SDS

E3 Primer: Forminex E3 Primer is a 2 part epoxy resin based primer coat ideally suitable for use on ferrous and non-ferrous metal substances. E3 has been formulated to the requirements of Title 21 CFR FDA (US Federal Government) thus making it suitable for use in Food Contact applications as a coating.


PDS SDS

Fairing Filling Powder: 661 Fairing Filler Powder is a formulated mineral and microsphere powder blend which has been specially treated to improve it’s miscibility with resins and provides easy sanding properties while still giving good vertical hold. It can be mixed with Epoxy Resins to thicken them for use as a light-weight full strength filler or as a “Fairing” blend. The mixed product is suitable for producing high strength coves, filling nail and screw holes and fairing hulls (both above and below the waterline) on all suitably prepared marine craft.

PDS SDS

Flatting Medium: 650 Flatting Medium is a specially formulated flatting additive to reduce the gloss level of most strong solvent-based paints and clear varnishes.



PDS SDS

Flexicoat: Fast drying, solvent based coating with highly elastic properties.


MSDS MSDS

Floorthane: A single-pack urethane pre-polymer which cures (dries) by reaction with the ambient moisture present in the atmosphere. 651 Floor-thane possesses properties previously available only in catalysed systems. Its abrasion resistance is in fact superior to two-pack floor coating systems. For interior use only.

MSDS MSDS

Floor-Tuff: Single-pack urethane prepolymer which cures (dries) by reaction with the ambient moisture present in the atmosphere. 652 Floor-Tuff possesses properties previously available only in catalysed systems. Its abrasion resistance is superior to many two-pack floor coating systems.


PDS SDS

Formacoat: Formacoat is a single-pack, solvent based acrylic re-coatable topcoat. It has excellent resistance to water, salt, chemicals and alkali. It is highly flexible and abrasion resistant.


PDS SDS

Formatt: 650 Formatt is a finely powdered, high efficiency matting agent. Due to its unique manufacturing process it is particularly suitable for systems which are difficult to matt and for both clear and pigmented finish coatings.


SDS

FX Hardener Part B: 662 Fx Hardener is a formulated hardener for all Forminex Two Pack polyurethane undercoats, primers and interior clears and top coats.


PDS SDS

F-200 Enamel Reducer: F Series Reducers are a range of formulated solvent blends designed for use with enamel productdescs. There are a number of differing productdescs in the F series range. The main difference between them is their speed of evaporation and hence the degree with which they will slow the drying of quick dry enamels.


PDS SDS

F-205 Slow Enamel Reducer: F Series Reducers are a range of formulated solvent blends designed for use with enamel products. There are a number of differing products in the F series range. The main difference between them is their speed of evaporation and hence the degree with which they will slow the drying of quick dry enamels.


PDS SDS

F-215 Extra Slow Enamel Reducer: F Series Reducers are a range of formulated solvent blends designed for use with enamel products. There are a number of differing products in the F series range. The main difference between them is their speed of evaporation and hence the degree with which they will slow the drying of quick dry enamels.

PDS MSDS

FX 150 Thinners: Thinners for all Forminex two Pack (2K) Polyurethane Coatings.


Data SDS

Galvabond: A single pack epoxy ester based zinc rich primer offering outstanding corrosion resistance and protection for steel as a single coat or as the primer in a multi coat finish. The high zinc content provides cathodic protection in a sacrificial manner to prevent spread of corrosion in the event of minor damage.

PDS SDS

GMH Flat Black Lacquer: A ready for use flat nitrocellulose lacquer for general automotive use.



Data MSDS

Great 78: Great 78 is a water based, PVA, flat paint for interior use on walls and ceilings. Great 78 may also be used for some exterior applications. Great 78 features good flexibility, colour retention, scrub and wash resistance. It is easy to apply, has good hiding power and is low in odour.


PDS SDS

Hammerfin: A fast drying, finish displaying typical "Hammer" appearance for decorative and abrasion resistant application on metal and properly primed timber surfaces. 903 Hammerfin hides most defects like scratch marks, weld spots and pit marks etc.


PDS SDS

Heatline 650: 600 Heatline 650ºC is a pure silicone based coating designed to withstand extremely high temperatures (up to 650°C). It presents an attractive finish and exhibits a highly decorative effect in appearance.



PDS SDS

Hi Fix Primer: A water based polymer acrylic primer and sealer designed for the complete and rapid sealing of porous surfaces such as concrete and Masonry.



PDS SDS

Hi Lustre Silver: 863 Hi lustre Silver is a bright aluminium paint which is based on an oleo-resinous vehicle and a brilliant leafing aluminium paste. The covering power is excellent and complete hiding can be obtained with one coat. Durability is extremely good whilst the heat and light reflectance is very impressive.


PDS SDS

H2O Water Based Gloss Enamel: 729 H20 is a water based pigmented enamel based on groundbreaking new urethane hybrid technology and is formulated as a replacement for traditional turps thinned “oil based” enamels. 729 H20’s technology is completely different from that used in conventional water based enamel replacements and achieves a degree of flow and levelling far ahead of its competitors thus eliminating much of the ropy brush marked appearance that is the hallmark of current water based enamels.


PDS SDS

H2O Water Based Satin Enamel: 729 H20 is a water based pigmented enamel based on groundbreaking new urethane hybrid technology and is formulated as a replacement for traditional turps thinned “oil based” enamels. 729 H20’s technology is completely different from that used in conventional water based enamel replacements and achieves a degree of flow and levelling far ahead of its competitors thus eliminating much of the ropy brush marked appearance that is the hallmark of current water based enamels.


PDS SDS

H.V. Quick Dry Aluminium: 713 H.V. High Viscosity Quick Dry Aluminium is a fast drying silver coating with excellent brightness and reflection. 713 Quick Dry Aluminium has excellent water and weather resistance.


PDS SDS

Implement Enamel: A fast drying general purpose spraying enamel of extra high gloss and good durability. Ideally suited for all industrial finishing where an air-dry coating is required.


PDS SDS

Leaf Check Dye Solution: An ideal product to determine spray coverage and dose on plant foliage, off target contamination, and the extent of contamination of equipment and personnel, with agricultural sprayers.


Data MSDS

Line Marking Paint Solvent Based: Monopack 896 Line Marking Paint Solvent Based is used to mark keyways and lines on floors were the Monopack Sports Floor Finish Solvent Based product has been used.


Data SDS

Line Marking Paint Water Based: Monopack Sports Floor Finish Water Based Line Marking Paint is a tough single pack water based urethane line marking paint for use as part of the Monopack Water Based Sports Floor System for use on strip timber, parquet and Granwood sports floors.


PDS SDS

Marine Varnish: 655 Marine Varnish is a single pack, oil-urethane varnish; available in either clear or timber shades and contains light– fast ultra-violet diffusing pigments with excellent weathering properties. 655 Marine Varnish provides a flexible, hardwearing surface that is exceptionally resistant to weather, salt water & spray, chemicals, petrol and oil.

PDS MSDS

Methylated Spirits: Paint Thinner


PDS SDS

008 Mineral Turpentine: Paint Thinner


PDS SDS

Mirasol: Designed for furniture manufacturers and restorers. 450 Mirasol is a transparent, quick drying nitrocellulose lacquer which provides excellent flow off the gun and produces a high build, flexible coating with good cold check resistance properties.


Data MSDS

Moisture Cure Urethane: Monopack Moisture Cured Urethane where a hard and abrasion resistant finish is required.


PDS SDS

Mop Top: 645 Mop-Top is a mop on, wax free polish for use over timber finishes.


PDS SDS

Nitrocellulose Lacquer: A top quality, self cross-linking pigmented nitrocellulose lacquer, which gives a good gloss off the gun, hardness, adhesion, flexibility and extended durability.


PDS SDS Part A SDS Part B

Nylocote: 116 Nylocote is a two part, cold cure, epoxy polyamide finish exhibiting outstanding adhesion to most material with excellent resistance against corrosive conditions such as atmospheric fumes or spillage and water immersion.


SDS

NY Hardener Part B: 663 NY Hardener is a non yellowing hardener for interior and exterior use. For use with Forminex top coats and non yellowing clears only.


PDS SDS

Paint Stripper: 675 Paint Stripper was developed to remove the most difficult to remove coatings i.e. two-pack polyurethane’s and epoxies, it is therefore very effective for the removal of almost any paint coating or varnish. It is recommended for use on wood, concrete and metal surfaces where the minimum of effort with the maximum efficiency is required. NOTE: Not suitable for use over fibreglass (GRP) or aluminium surfaces. It is fast acting; non-flammable; will not stain or damage timber; leaves surfaces ready for re-coating; does not require neutralizing, and does not contain wax.

PDS SDS

Pave Seal: 691 Pave Seal is a water based stain resisting treatment (not a coating) for use on many types of concrete, stone and masonry and if applied correctly does not significantly change the appearance of most treated surfaces, does not increase the slip risk of the surface and does not change the vapour permeability of the surface. The treatment penetrates the porous nature of a concrete or stone material (the capillaries). 691 Pave Seal imparts both an oil repellent (oleo-phobic) and water repellent (hydrophobic) nature to the treated surface.

Data MSDS

Pink Wood Primer: A top quality lead free, traditional, oil based primer suitable for the use on most interior and exterior wood surfaces. 809 Pink Wood Primer has the excellent ability to penetrate and seal on new and old unpainted timber.


Data SDS

Pot Belly Black: 606 Pot Belly Black is a pure silicone based coating designed to withstand extremely high temperatures. It is particularly suited to use on the hot surfaces of pot belly stoves and fireplaces.


Data MSDS

Precat Sanding Sealer: A clear medium bodied single pack precatalysed lacquer sanding sealer. This productdesc has high solids, coupled with a fast solvent release, thereby reducing the drying time between coats. 452 Precat Sanding Sealer has excellent filling properties which also reduces the number of top coats required.


Data MSDS

Premium Artistic Fluro: 810 Premium Artistic Fluro is a premium quality matt finish produced in a range of Fluorescent colours especially for display and signwriting work. It has been formulated to produce clean, bright fluorescent colours of maximum brilliance.


PDS SDS

Premium Ceiling White: 755 Premium Ceiling White is a water based, flat paint for interior use on walls and ceilings. Premium Ceiling White may also be used for some exterior applications. 755 Premium Ceiling White features excellent hiding power and is low in odour.


PDS SDS

Premium Flat Acrylic: 802 Premium Flat Acrylic is a water based, acrylic modified, flat paint for interior use on walls and ceilings and may also be used for some exterior applications. 802 Premium Flat Acrylic features excellent flexibility, colour retention, scrub and wash resistance, easy to apply, has excellent hiding power and is low in odour.


PDS SDS

Premium Lo Sheen Acrylic: 803 Premium Lo Sheen Acrylic is a water based, acrylic modified, Lo Sheen paint for interior use on walls and ceilings and may also be used for exterior applications on properly prepared and primed surfaces. 803 Premium Lo Sheen Acrylic features excellent flexibility, colour retention, scrub and wash resistance, easy to apply, has excellent hiding power and is low in odour.


Data MSDS

Premium Gloss Acrylic: 808 Premium Gloss Acrylic is a water based, acrylic modified, Gloss paint for interior use on walls and ceilings and may also be used for exterior applications on properly prepared and primed surfaces. 808 Premium Gloss Acrylic features excellent flexibility, colour retention, scrub and wash resistance, easy to apply, has excellent hiding power and is low in odour.


PDS SDS

Premium Gloss Enamel: Durable, traditional long oil alkyd based enamel which displays a brilliant gloss and is hard wearing. Whilst 813 Premium Gloss Enamel is a relatively hard paint film it is still flexible enough to be suitable for interior and exterior use and is available in a wide range of colours based on pigments selected for their long term light-fastness and opacity.


Data SDS

Premium Satin Acrylic: 805 Premium Satin Acrylic is a water based, acrylic modified, satin paint for interior use on walls and ceilings and may also be used for exterior applications on properly prepared and primed surfaces. 805 Premium Satin Acrylic features excellent flexibility, colour retention, scrub and wash resistance, easy to apply, has excellent hiding power and is low in odour.


PDS SDS

PVA Paint: An economical flat water based finish formulated for the painting of wooden pallets, Line marking on various surfaces and Tree Marking.


PDS SDS

Quick Dry Aluminium: 713 Quick Dry Aluminium is a fast drying silver coating with excellent brightness and reflection. 713 Quick Dry Aluminium has excellent water and weather resistance.


PDS SDS

Quick Dry Enamel: 404 Quick Dry Enamel is a very fast drying enamel which is pigmented with a non-leafing aluminium to give a rich metallic silver finish. 404 Quick Dry Enamel is based on epoxy modified polymer resins. It produces a touch, wear resistant finish good weathering and durability.


PDS SDS

Radiator Black: 306 Radiator Black is a quick dry enamel with excellent coverage and good flexibility. 306 Radiator Enamel has excellent adhesion to both primed and un-primed metal surfaces. 306 Radiator Enamel is also extremely fast drying.


Data MSDS

Rapid Dry Sealer: 871 Rapid Dry Sealer is a rapid dry, solvent based sealer for use as a first coat under Monopack Moisture Cure Urethanes, on all timber and cork flooring.


Data MSDS

Rapid Seal: A fast drying pigmented stain sealer based on Shellac and Methylated Spirits.


PDS SDS SDS

Red Metal Primer: 681 Red Metal Primer is a Polyurethane based Metal Primer which combines adhesion with great impermeability and which incorporates corrosion resistant pigments.


Data SDS

Roadline: 900 Roadline is a water based acrylic coating modified especially formulated to give a quick drying, durable paint for spray application. 900 Roadline possesses excellent adhesion to concrete and bitumen and is highly resistant to wear, abrasion and weather.


Data MSDS

Sama Galvguard: 812 Sama Galvguard is a water based acrylic anti-corrosive primer for general use on all interior or exterior metal surfaces, including new or weathered galvanised iron and must be over coated with a suitable finishing coat.


PDS SDS SDS

Sanding Primer: 664 Sanding Primer is a high build, easily sanded primer / undercoat, especially formulated to achieve a high-build surface that has good filling properties. It is suitable for marine and general applications.


PDS SDS

Satin Etch Primer: A single pack, self etching primer, designed to promote maximum adhesion of topcoats to properly cleaned and prepared metals and alloys. 127 Satin Etch Primer contributes to the excellent anti-corrosive properties of suitable paint systems.

PDS SDS

Slate & Pave: 671 Slate & Pave is a multi-purpose, solvent-based-acrylic solution. It produces a hard flexible non yellowing film, which is resistant to water and alkalis. Slate and Pave has excellent resistance to ultraviolet light.


PDS SDS

Solarcryl: 806 Solarcryl is an easy to apply, 100% acrylic, opaque, UV resistant, water based coating, which generally does not require any undercoat. 806 Solarcryl will give that "Rustic Timber Look" to interior and exterior surfaces. It can also be applied to suitably primed metal surfaces. 806 Solarcryl's other features are it's high opacity, mould and fungus resistance and excellent exterior durability.


PDS SDS

Sports Floor Cleaner: Monopack Sports Floor Cleaner is a mild non-aggressive biodegradable detergent cleaner containing natural citrus oil extract, designed for regular cleaning of floors finished with the Monopack Sports Floor Finish.


Data SDS

Sports Floor Cross Linker: Monopack Sports Floor Finish Water Based Cross Linker is an additive only to be used in the Monopack Sports Floor Finish Water Based Version.


PDS SDS

Sports Floor Finish Solvent Based: Monopack Sports Floor Solvent Based Finish is recommended as a tough solvent based clear gloss urethane finish on strip timber. It is suitable for both new floors and for re-coating.


Data SDS

Sports Floor Finish Water Based: Monopack Sports Floor Water Based Finish is recommended as a tough water based clear gloss urethane finish on strip timber, parquet and Granwood sports floors. It is suitable for both new floors and for re-coating.


Data MSDS

Spray on - Wipe off Cleaner: Monopack Spray On – Wipe Off Cleaner is a biodegradable detergent cleaner designed to spot clean heel marks etc.


PDS SDS

Superbond Etch Primer: A single pack, self etching primer, designed to promote maximum adhesion of topcoats to properly cleaned and prepared metals and alloys. 131 Superbond contributes to the excellent anti-corrosive properties of suitable paint systems. 131 Superbond also provides moderate filling to scratches, disc marks etc.

PDS SDS

Superfill Sanding Sealer: A pale coloured, medium bodied sanding sealer with superb sanding properties. The extra high solids coupled with fast solvent release gives excellent hold out and filling properties for subsequent top coats.


PDS SDS SDS

Supergloss: 677 Supergloss is a marine grade non-yellowing linear (aliphatic) Polyurethane surface coating for outdoor and indoor use.


Data MSDS

Superhide Undercoat: A high opacity, easy brushing undercoat suitable for both interior and exterior use. Superhide gives a high build, sands easily and possesses excellent "hold out" for succeeding coats of enamel. Superhide Undercoat is oil modified and contains Zinc Oxide, thereby providing a better mould resistance and durability.


PDS SDS

Superwash:Superwash is a water based, biodegradable, industrial strength, multipurpose cleaning detergent suitable for the preparation of swimming pool surfaces and floors prior to painting. 684 Superwash is non-flammable and has virtually no odour making it suitable for use in confined areas.

PDS SDS Part A SDS Part B

Super Etch Primer: A general purpose, two pack etch primer suitable for all ferrous and non ferrous metals which. In addition to acting as an etch primer on “difficult to adhere to” metals, it can also keep blasted steel from rusting and forms an excellent key for subsequent paint coatings including acrylic lacquers and two pack epoxies and urethanes.

Data MSDS

Timbertone: A single pack stable polyurethane clear coating designed for application to interior woodwork. Dries very fast to a tough finish of exceptional resistance to abrasion, heat water and alcohol. Wipes clean easily, seals and protects against dirt and stains.


PDS SDS

Timber Clean: 683 Timber Clean is a non-bleaching cleaner for restoring dirty, weather stained timber. It removes rust and tannin stains, most mould, fungus and cement marks without damaging the timber and is Biodegradable.


PDS SDS

Topcat: Designed for furniture manufacturers and restorers. 451 Topcat is an economical medium solids pre-catalysed nitrocellulose furniture lacquer which is fast drying, abrasion and impact resistant and enhances the natural timber look.


PDS SDS

Topclear: Designed for furniture manufacturers and restorers. 462 Topclear is a pre-catalysed nitrocellulose furniture lacquer which is fast drying, abrasion and impact resistant and enhances the natural timber look.


PDS SDS

Touch Up Enamel: Durable, traditional long oil alkyd based enamel which displays a brilliant gloss and is hard wearing. Whilst 815 Touch Up Enamel is a relatively hard paint film it is still flexible enough to be suitable for interior and exterior use and is available in a wide range of colours based on pigments selected for their long term light-fastness and opacity.


PDS SDS

Trilac Acrylic Primer: 106 Trilac Primer is a high solids, lacquer based primer surfacer. 106 Trilac Primer features high film build, more filling per coat, rapid dry, free sanding and excellent hold-out properties for top coats.


MSDS MSDS

Tung Oil Sealer: Single pack, traditional, tung oil resin based timber sealer, for use on interior timber. It is particularly suitable for use on timber board floors where excessive shrinkage or expansion is likely to occur.


PDS SDS

Turfline: A flat water based finish formulated for line marking on grass / turf surfaces. It is formulated free of chemicals that may kill grass and lawns to prevent damage to the line marked turf.


PDS SDS

T-1 Acrylic Lacquer Thinner: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-2 Lacquer Thinner: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-3 Wax & Grease Remover (Prepsol): T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-9 Estagloss Spraying Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-11 Epoxy Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-13 Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-14 Gunwash: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-15 Economy Gunwash: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-18 Extra Slow Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-22 Etch Primer Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-24 Lacquer Retarder: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-27 Special Brushing Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

995 T-34 Elextrostatic Reducer: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-64 All Purpose Thinners: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-80 Reducer (Xylol): T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-85 Reducer (Toluol): T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-90 (MEK): T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

T-99 Screenwash: T Series Reducers are a range of formulated solvent blends designed for use with either a range of paint products or a specific product.


PDS SDS

Uadd: 502 Urethane Enamel Additive is an ‘isocyanate cross-linker’ designed to improve the petrol resistance, gloss, durability, drying and resistance to chemicals and oil of alkyd based enamels.


Data SDS

Ultracoat Enamel: 525 Ultracoat Enamel has been formulated to provide the highest durability possible from a quick drying enamel. It has extremely high gloss, fast through drying and exceptional durability under severest weather conditions.


Data SDS MSDS

Universal Undercoat: 678 Universal Undercoat is a two-pack Polyurethane based, pigmented undercoat designed for use on surfaces such as timber, fiberglass hardboards, fibrous cement, concrete etc., Also suitable on primed surfaces such as Aluminum or Steel. For superior adhesion over difficult to paint surfaces See Data Sheet for 643 Ceramaglass.


Data MSDS

Velvet Satin Enamel: An alkyd oil based satin enamel for interior use which dries to a hard durable finish. Velvet Satin Enamel features a high opacity, easy application and excellent flow and levelling.


PDS SDS

Vinyl Primer: 666 Vinyl Primer (in older literature also known as Marine Systems or Forminex Anti Fouling Primer) is a single pack solvent based primer. It has excellent bleed stopping properties and provides superior adhesion to a wide range of substrates including: wood, steel, masonry and fibreglass. 666 Vinyl Primer may be used on surfaces that will remain immersed in water.


PDS SDS

Vinyl Thinner: Thinners for Vinyl Primer and Traditional Anti foul coatings.


PDS SDS SDS

Vitraform AQ: 768 Vitraform AQ is an innovative new water based non yellowing, flexible, 2-Part clear fluro-acrylic coating. Originally formulated as an anti-graffiti coating, its excellent resistance to abrasion, chemicals, solvents and oils also makes it suitable for a wide range of other applications.


PDS SDS

Walk Floor Paint: A tough, fast drying, heavy-duty floor and paving paint suitable for application to concrete and timber floors for interior use only. 820 Walk Floor Paint has excellent resistance to household chemicals and abrasion.


PDS SDS Part A SDS Part B

Water Based Epoxy Floor Coating:Forminex Water based Epoxy Floor Coating is a two-pack, water based epoxy finish for most types of floor including concrete, timber and fibre cement. It can also be used as a coating for most types of vinyl and lino floor covering. Being water based it offers 2 major advantages over older solvent based epoxy floor finishes; low odour and low VOC, tolerant of green or damp concrete.

PDS SDS

Water Borne Metal Primer: A water based modified alkyd based industrial metal primer for excellent corrosion resistance and protection for metal surfaces. Dries with a smooth satin finish, providing an excellent base for re-coating.


Data MSDS

Wood Floor Oil: Monopack 895 Wood Oil is a tough penetrating natural oil based seal for all types of wooden floors including parquetry, school gymnasiums and sports halls.


PDS SDS

008 White Spirits: Paint Thinner


PDS SDS

Wood Undercoat: A specially formulated lacquer undercoat designed to give high filling and easy sanding properties. 307 Wood Undercoat has excellent adhesion to bare timber, gives excellent hold out for a finishing coat and is very fast drying.