Floor and Paving Coatings

We have floor and paving coatings for almost any surface including; timber, slate, cork, cement, ground cement, steel, particle board, ceramic tiles, quarry tiles, terrazzo, terracotta, sandstone, pavers, lino and vinyls. We also have finishes to reduce the risk of slips and falls too.

shipways coats



is a single pack, traditional, tung-oil resin based timber sealer, for use on interior timber and cork. It is particularly suitable for use on timber board floors where excessive shrinkage or expansion is likely to occur.

Click here for product data >>


is a clear single pack, moisture cured urethane, for use on interior timber, cork, particle board and concrete floors. It is available in gloss or may have FLATTING MEDIUM added to it to create a satin finish. Very durable, fast drying and easy to apply.

Click here for product data >>


is a water based replacement for single pack and moisture cure clear polyurethanes, available in gloss or satin finishes. For use on interior joinery, furniture and floors. It has excellent resistance to abrasion, heat, moisture, and most oils, solvents and chemicals.

Click here for product data >>


is a water based two pack finish for concrete floors. It may also be used over lino or vinyl flooring and a wide range of other floor finishes (please discuss your application with us). Suited for use in any situation from domestic to aggressive industrial applications. It is very low in odour especially when compared to conventional solvent based floor coatings and can even be used on green concrete. Available in both clear and colours.

Click here for product data >>



116 Nylocote is a two part, solvent thinned, cold cure, epoxy polyamide finish exhibiting outstanding adhesion to most material with excellent resistance against corrosive conditions such as atmospheric fumes or spillage and water immersion. Excellent for interior concrete floors where high durability and chemical resistance is required. 116 Nylocote is available in clear as well as a wide colour range.

Click here for product data >>


Premium two-pack, water clear (non-yellowing) polyurethane for interior and exterior use. Higher build than Vitraform for porous surfaces. Has excellent UV chemical and abrasion resistance and long life gloss. Ideal as floor and timber coating where a non-yellowing finish is required.

Click here for product data >>


is a clear, non-yellowing, interior/exterior solvent-based acrylic finish, for use on slate, concrete, sandstone and most masonry surfaces. Suitable for driveways.

Click here for product data >>


We get a large number of enquiries for a “sealer for concrete pavers” often around swimming pools. We simply do not recommend our Slate and Pave for this purpose as pavers are usually not laid over dampcoursing and water/efflourescence problems usually mean a short life for any coating on pavers. The use of any type of coating on pavers will also usually make them glossy and much more slippery. Spescoat Pave Seal overcomes this as it is a surface treatment rather than a coating and does not change the surface appearance in any way. It will help prevent staining from oils, greases, food, wine and such like making it perfect for pavers in entertaining areas. Whilst we cant guarantee that it will prevent staining in all cases on all substrates we can say that it will make clean up much easier and any residual stain left behind will me far less than it would be on an untreated paver.

 Click here for product data >>